PHP WebShell
Текущая директория: /usr/lib/node_modules/bitgo/node_modules/@bitgo/sdk-lib-mpc/node_modules/@noble/curves/abstract
Просмотр файла: tower.js
"use strict";
Object.defineProperty(exports, "__esModule", { value: true });
exports.psiFrobenius = psiFrobenius;
exports.tower12 = tower12;
/**
* Towered extension fields.
* Rather than implementing a massive 12th-degree extension directly, it is more efficient
* to build it up from smaller extensions: a tower of extensions.
*
* For BLS12-381, the Fp12 field is implemented as a quadratic (degree two) extension,
* on top of a cubic (degree three) extension, on top of a quadratic extension of Fp.
*
* For more info: "Pairings for beginners" by Costello, section 7.3.
* @module
*/
/*! noble-curves - MIT License (c) 2022 Paul Miller (paulmillr.com) */
const mod = require("./modular.js");
const utils_js_1 = require("./utils.js");
// Be friendly to bad ECMAScript parsers by not using bigint literals
// prettier-ignore
const _0n = BigInt(0), _1n = BigInt(1), _2n = BigInt(2), _3n = BigInt(3);
function calcFrobeniusCoefficients(Fp, nonResidue, modulus, degree, num = 1, divisor) {
const _divisor = BigInt(divisor === undefined ? degree : divisor);
const towerModulus = modulus ** BigInt(degree);
const res = [];
for (let i = 0; i < num; i++) {
const a = BigInt(i + 1);
const powers = [];
for (let j = 0, qPower = _1n; j < degree; j++) {
const power = ((a * qPower - a) / _divisor) % towerModulus;
powers.push(Fp.pow(nonResidue, power));
qPower *= modulus;
}
res.push(powers);
}
return res;
}
// This works same at least for bls12-381, bn254 and bls12-377
function psiFrobenius(Fp, Fp2, base) {
// Ψ endomorphism
const PSI_X = Fp2.pow(base, (Fp.ORDER - _1n) / _3n); // u^((p-1)/3)
const PSI_Y = Fp2.pow(base, (Fp.ORDER - _1n) / _2n); // u^((p-1)/2)
function psi(x, y) {
// This x10 faster than previous version in bls12-381
const x2 = Fp2.mul(Fp2.frobeniusMap(x, 1), PSI_X);
const y2 = Fp2.mul(Fp2.frobeniusMap(y, 1), PSI_Y);
return [x2, y2];
}
// Ψ²(P) endomorphism (psi2(x) = psi(psi(x)))
const PSI2_X = Fp2.pow(base, (Fp.ORDER ** _2n - _1n) / _3n); // u^((p^2 - 1)/3)
// This equals -1, which causes y to be Fp2.neg(y).
// But not sure if there are case when this is not true?
const PSI2_Y = Fp2.pow(base, (Fp.ORDER ** _2n - _1n) / _2n); // u^((p^2 - 1)/3)
if (!Fp2.eql(PSI2_Y, Fp2.neg(Fp2.ONE)))
throw new Error('psiFrobenius: PSI2_Y!==-1');
function psi2(x, y) {
return [Fp2.mul(x, PSI2_X), Fp2.neg(y)];
}
// Map points
const mapAffine = (fn) => (c, P) => {
const affine = P.toAffine();
const p = fn(affine.x, affine.y);
return c.fromAffine({ x: p[0], y: p[1] });
};
const G2psi = mapAffine(psi);
const G2psi2 = mapAffine(psi2);
return { psi, psi2, G2psi, G2psi2, PSI_X, PSI_Y, PSI2_X, PSI2_Y };
}
function tower12(opts) {
const { ORDER } = opts;
// Fp
const Fp = mod.Field(ORDER);
const FpNONRESIDUE = Fp.create(opts.NONRESIDUE || BigInt(-1));
const FpLegendre = mod.FpLegendre(ORDER);
const Fpdiv2 = Fp.div(Fp.ONE, _2n); // 1/2
// Fp2
const FP2_FROBENIUS_COEFFICIENTS = calcFrobeniusCoefficients(Fp, FpNONRESIDUE, Fp.ORDER, 2)[0];
const Fp2Add = ({ c0, c1 }, { c0: r0, c1: r1 }) => ({
c0: Fp.add(c0, r0),
c1: Fp.add(c1, r1),
});
const Fp2Subtract = ({ c0, c1 }, { c0: r0, c1: r1 }) => ({
c0: Fp.sub(c0, r0),
c1: Fp.sub(c1, r1),
});
const Fp2Multiply = ({ c0, c1 }, rhs) => {
if (typeof rhs === 'bigint')
return { c0: Fp.mul(c0, rhs), c1: Fp.mul(c1, rhs) };
// (a+bi)(c+di) = (ac−bd) + (ad+bc)i
const { c0: r0, c1: r1 } = rhs;
let t1 = Fp.mul(c0, r0); // c0 * o0
let t2 = Fp.mul(c1, r1); // c1 * o1
// (T1 - T2) + ((c0 + c1) * (r0 + r1) - (T1 + T2))*i
const o0 = Fp.sub(t1, t2);
const o1 = Fp.sub(Fp.mul(Fp.add(c0, c1), Fp.add(r0, r1)), Fp.add(t1, t2));
return { c0: o0, c1: o1 };
};
const Fp2Square = ({ c0, c1 }) => {
const a = Fp.add(c0, c1);
const b = Fp.sub(c0, c1);
const c = Fp.add(c0, c0);
return { c0: Fp.mul(a, b), c1: Fp.mul(c, c1) };
};
const Fp2fromBigTuple = (tuple) => {
if (tuple.length !== 2)
throw new Error('invalid tuple');
const fps = tuple.map((n) => Fp.create(n));
return { c0: fps[0], c1: fps[1] };
};
const FP2_ORDER = ORDER * ORDER;
const Fp2Nonresidue = Fp2fromBigTuple(opts.FP2_NONRESIDUE);
const Fp2 = {
ORDER: FP2_ORDER,
isLE: Fp.isLE,
NONRESIDUE: Fp2Nonresidue,
BITS: (0, utils_js_1.bitLen)(FP2_ORDER),
BYTES: Math.ceil((0, utils_js_1.bitLen)(FP2_ORDER) / 8),
MASK: (0, utils_js_1.bitMask)((0, utils_js_1.bitLen)(FP2_ORDER)),
ZERO: { c0: Fp.ZERO, c1: Fp.ZERO },
ONE: { c0: Fp.ONE, c1: Fp.ZERO },
create: (num) => num,
isValid: ({ c0, c1 }) => typeof c0 === 'bigint' && typeof c1 === 'bigint',
is0: ({ c0, c1 }) => Fp.is0(c0) && Fp.is0(c1),
eql: ({ c0, c1 }, { c0: r0, c1: r1 }) => Fp.eql(c0, r0) && Fp.eql(c1, r1),
neg: ({ c0, c1 }) => ({ c0: Fp.neg(c0), c1: Fp.neg(c1) }),
pow: (num, power) => mod.FpPow(Fp2, num, power),
invertBatch: (nums) => mod.FpInvertBatch(Fp2, nums),
// Normalized
add: Fp2Add,
sub: Fp2Subtract,
mul: Fp2Multiply,
sqr: Fp2Square,
// NonNormalized stuff
addN: Fp2Add,
subN: Fp2Subtract,
mulN: Fp2Multiply,
sqrN: Fp2Square,
// Why inversion for bigint inside Fp instead of Fp2? it is even used in that context?
div: (lhs, rhs) => Fp2.mul(lhs, typeof rhs === 'bigint' ? Fp.inv(Fp.create(rhs)) : Fp2.inv(rhs)),
inv: ({ c0: a, c1: b }) => {
// We wish to find the multiplicative inverse of a nonzero
// element a + bu in Fp2. We leverage an identity
//
// (a + bu)(a - bu) = a² + b²
//
// which holds because u² = -1. This can be rewritten as
//
// (a + bu)(a - bu)/(a² + b²) = 1
//
// because a² + b² = 0 has no nonzero solutions for (a, b).
// This gives that (a - bu)/(a² + b²) is the inverse
// of (a + bu). Importantly, this can be computing using
// only a single inversion in Fp.
const factor = Fp.inv(Fp.create(a * a + b * b));
return { c0: Fp.mul(factor, Fp.create(a)), c1: Fp.mul(factor, Fp.create(-b)) };
},
sqrt: (num) => {
if (opts.Fp2sqrt)
return opts.Fp2sqrt(num);
// This is generic for all quadratic extensions (Fp2)
const { c0, c1 } = num;
if (Fp.is0(c1)) {
// if c0 is quadratic residue
if (Fp.eql(FpLegendre(Fp, c0), Fp.ONE))
return Fp2.create({ c0: Fp.sqrt(c0), c1: Fp.ZERO });
else
return Fp2.create({ c0: Fp.ZERO, c1: Fp.sqrt(Fp.div(c0, FpNONRESIDUE)) });
}
const a = Fp.sqrt(Fp.sub(Fp.sqr(c0), Fp.mul(Fp.sqr(c1), FpNONRESIDUE)));
let d = Fp.mul(Fp.add(a, c0), Fpdiv2);
const legendre = FpLegendre(Fp, d);
// -1, Quadratic non residue
if (!Fp.is0(legendre) && !Fp.eql(legendre, Fp.ONE))
d = Fp.sub(d, a);
const a0 = Fp.sqrt(d);
const candidateSqrt = Fp2.create({ c0: a0, c1: Fp.div(Fp.mul(c1, Fpdiv2), a0) });
if (!Fp2.eql(Fp2.sqr(candidateSqrt), num))
throw new Error('Cannot find square root');
// Normalize root: at this point candidateSqrt ** 2 = num, but also -candidateSqrt ** 2 = num
const x1 = candidateSqrt;
const x2 = Fp2.neg(x1);
const { re: re1, im: im1 } = Fp2.reim(x1);
const { re: re2, im: im2 } = Fp2.reim(x2);
if (im1 > im2 || (im1 === im2 && re1 > re2))
return x1;
return x2;
},
// Same as sgn0_m_eq_2 in RFC 9380
isOdd: (x) => {
const { re: x0, im: x1 } = Fp2.reim(x);
const sign_0 = x0 % _2n;
const zero_0 = x0 === _0n;
const sign_1 = x1 % _2n;
return BigInt(sign_0 || (zero_0 && sign_1)) == _1n;
},
// Bytes util
fromBytes(b) {
if (b.length !== Fp2.BYTES)
throw new Error('fromBytes invalid length=' + b.length);
return { c0: Fp.fromBytes(b.subarray(0, Fp.BYTES)), c1: Fp.fromBytes(b.subarray(Fp.BYTES)) };
},
toBytes: ({ c0, c1 }) => (0, utils_js_1.concatBytes)(Fp.toBytes(c0), Fp.toBytes(c1)),
cmov: ({ c0, c1 }, { c0: r0, c1: r1 }, c) => ({
c0: Fp.cmov(c0, r0, c),
c1: Fp.cmov(c1, r1, c),
}),
reim: ({ c0, c1 }) => ({ re: c0, im: c1 }),
// multiply by u + 1
mulByNonresidue: ({ c0, c1 }) => Fp2.mul({ c0, c1 }, Fp2Nonresidue),
mulByB: opts.Fp2mulByB,
fromBigTuple: Fp2fromBigTuple,
frobeniusMap: ({ c0, c1 }, power) => ({
c0,
c1: Fp.mul(c1, FP2_FROBENIUS_COEFFICIENTS[power % 2]),
}),
};
// Fp6
const Fp6Add = ({ c0, c1, c2 }, { c0: r0, c1: r1, c2: r2 }) => ({
c0: Fp2.add(c0, r0),
c1: Fp2.add(c1, r1),
c2: Fp2.add(c2, r2),
});
const Fp6Subtract = ({ c0, c1, c2 }, { c0: r0, c1: r1, c2: r2 }) => ({
c0: Fp2.sub(c0, r0),
c1: Fp2.sub(c1, r1),
c2: Fp2.sub(c2, r2),
});
const Fp6Multiply = ({ c0, c1, c2 }, rhs) => {
if (typeof rhs === 'bigint') {
return {
c0: Fp2.mul(c0, rhs),
c1: Fp2.mul(c1, rhs),
c2: Fp2.mul(c2, rhs),
};
}
const { c0: r0, c1: r1, c2: r2 } = rhs;
const t0 = Fp2.mul(c0, r0); // c0 * o0
const t1 = Fp2.mul(c1, r1); // c1 * o1
const t2 = Fp2.mul(c2, r2); // c2 * o2
return {
// t0 + (c1 + c2) * (r1 * r2) - (T1 + T2) * (u + 1)
c0: Fp2.add(t0, Fp2.mulByNonresidue(Fp2.sub(Fp2.mul(Fp2.add(c1, c2), Fp2.add(r1, r2)), Fp2.add(t1, t2)))),
// (c0 + c1) * (r0 + r1) - (T0 + T1) + T2 * (u + 1)
c1: Fp2.add(Fp2.sub(Fp2.mul(Fp2.add(c0, c1), Fp2.add(r0, r1)), Fp2.add(t0, t1)), Fp2.mulByNonresidue(t2)),
// T1 + (c0 + c2) * (r0 + r2) - T0 + T2
c2: Fp2.sub(Fp2.add(t1, Fp2.mul(Fp2.add(c0, c2), Fp2.add(r0, r2))), Fp2.add(t0, t2)),
};
};
const Fp6Square = ({ c0, c1, c2 }) => {
let t0 = Fp2.sqr(c0); // c0²
let t1 = Fp2.mul(Fp2.mul(c0, c1), _2n); // 2 * c0 * c1
let t3 = Fp2.mul(Fp2.mul(c1, c2), _2n); // 2 * c1 * c2
let t4 = Fp2.sqr(c2); // c2²
return {
c0: Fp2.add(Fp2.mulByNonresidue(t3), t0), // T3 * (u + 1) + T0
c1: Fp2.add(Fp2.mulByNonresidue(t4), t1), // T4 * (u + 1) + T1
// T1 + (c0 - c1 + c2)² + T3 - T0 - T4
c2: Fp2.sub(Fp2.sub(Fp2.add(Fp2.add(t1, Fp2.sqr(Fp2.add(Fp2.sub(c0, c1), c2))), t3), t0), t4),
};
};
const [FP6_FROBENIUS_COEFFICIENTS_1, FP6_FROBENIUS_COEFFICIENTS_2] = calcFrobeniusCoefficients(Fp2, Fp2Nonresidue, Fp.ORDER, 6, 2, 3);
const Fp6 = {
ORDER: Fp2.ORDER, // TODO: unused, but need to verify
isLE: Fp2.isLE,
BITS: 3 * Fp2.BITS,
BYTES: 3 * Fp2.BYTES,
MASK: (0, utils_js_1.bitMask)(3 * Fp2.BITS),
ZERO: { c0: Fp2.ZERO, c1: Fp2.ZERO, c2: Fp2.ZERO },
ONE: { c0: Fp2.ONE, c1: Fp2.ZERO, c2: Fp2.ZERO },
create: (num) => num,
isValid: ({ c0, c1, c2 }) => Fp2.isValid(c0) && Fp2.isValid(c1) && Fp2.isValid(c2),
is0: ({ c0, c1, c2 }) => Fp2.is0(c0) && Fp2.is0(c1) && Fp2.is0(c2),
neg: ({ c0, c1, c2 }) => ({ c0: Fp2.neg(c0), c1: Fp2.neg(c1), c2: Fp2.neg(c2) }),
eql: ({ c0, c1, c2 }, { c0: r0, c1: r1, c2: r2 }) => Fp2.eql(c0, r0) && Fp2.eql(c1, r1) && Fp2.eql(c2, r2),
sqrt: utils_js_1.notImplemented,
// Do we need division by bigint at all? Should be done via order:
div: (lhs, rhs) => Fp6.mul(lhs, typeof rhs === 'bigint' ? Fp.inv(Fp.create(rhs)) : Fp6.inv(rhs)),
pow: (num, power) => mod.FpPow(Fp6, num, power),
invertBatch: (nums) => mod.FpInvertBatch(Fp6, nums),
// Normalized
add: Fp6Add,
sub: Fp6Subtract,
mul: Fp6Multiply,
sqr: Fp6Square,
// NonNormalized stuff
addN: Fp6Add,
subN: Fp6Subtract,
mulN: Fp6Multiply,
sqrN: Fp6Square,
inv: ({ c0, c1, c2 }) => {
let t0 = Fp2.sub(Fp2.sqr(c0), Fp2.mulByNonresidue(Fp2.mul(c2, c1))); // c0² - c2 * c1 * (u + 1)
let t1 = Fp2.sub(Fp2.mulByNonresidue(Fp2.sqr(c2)), Fp2.mul(c0, c1)); // c2² * (u + 1) - c0 * c1
let t2 = Fp2.sub(Fp2.sqr(c1), Fp2.mul(c0, c2)); // c1² - c0 * c2
// 1/(((c2 * T1 + c1 * T2) * v) + c0 * T0)
let t4 = Fp2.inv(Fp2.add(Fp2.mulByNonresidue(Fp2.add(Fp2.mul(c2, t1), Fp2.mul(c1, t2))), Fp2.mul(c0, t0)));
return { c0: Fp2.mul(t4, t0), c1: Fp2.mul(t4, t1), c2: Fp2.mul(t4, t2) };
},
// Bytes utils
fromBytes: (b) => {
if (b.length !== Fp6.BYTES)
throw new Error('fromBytes invalid length=' + b.length);
return {
c0: Fp2.fromBytes(b.subarray(0, Fp2.BYTES)),
c1: Fp2.fromBytes(b.subarray(Fp2.BYTES, 2 * Fp2.BYTES)),
c2: Fp2.fromBytes(b.subarray(2 * Fp2.BYTES)),
};
},
toBytes: ({ c0, c1, c2 }) => (0, utils_js_1.concatBytes)(Fp2.toBytes(c0), Fp2.toBytes(c1), Fp2.toBytes(c2)),
cmov: ({ c0, c1, c2 }, { c0: r0, c1: r1, c2: r2 }, c) => ({
c0: Fp2.cmov(c0, r0, c),
c1: Fp2.cmov(c1, r1, c),
c2: Fp2.cmov(c2, r2, c),
}),
fromBigSix: (t) => {
if (!Array.isArray(t) || t.length !== 6)
throw new Error('invalid Fp6 usage');
return {
c0: Fp2.fromBigTuple(t.slice(0, 2)),
c1: Fp2.fromBigTuple(t.slice(2, 4)),
c2: Fp2.fromBigTuple(t.slice(4, 6)),
};
},
frobeniusMap: ({ c0, c1, c2 }, power) => ({
c0: Fp2.frobeniusMap(c0, power),
c1: Fp2.mul(Fp2.frobeniusMap(c1, power), FP6_FROBENIUS_COEFFICIENTS_1[power % 6]),
c2: Fp2.mul(Fp2.frobeniusMap(c2, power), FP6_FROBENIUS_COEFFICIENTS_2[power % 6]),
}),
mulByFp2: ({ c0, c1, c2 }, rhs) => ({
c0: Fp2.mul(c0, rhs),
c1: Fp2.mul(c1, rhs),
c2: Fp2.mul(c2, rhs),
}),
mulByNonresidue: ({ c0, c1, c2 }) => ({ c0: Fp2.mulByNonresidue(c2), c1: c0, c2: c1 }),
// Sparse multiplication
mul1: ({ c0, c1, c2 }, b1) => ({
c0: Fp2.mulByNonresidue(Fp2.mul(c2, b1)),
c1: Fp2.mul(c0, b1),
c2: Fp2.mul(c1, b1),
}),
// Sparse multiplication
mul01({ c0, c1, c2 }, b0, b1) {
let t0 = Fp2.mul(c0, b0); // c0 * b0
let t1 = Fp2.mul(c1, b1); // c1 * b1
return {
// ((c1 + c2) * b1 - T1) * (u + 1) + T0
c0: Fp2.add(Fp2.mulByNonresidue(Fp2.sub(Fp2.mul(Fp2.add(c1, c2), b1), t1)), t0),
// (b0 + b1) * (c0 + c1) - T0 - T1
c1: Fp2.sub(Fp2.sub(Fp2.mul(Fp2.add(b0, b1), Fp2.add(c0, c1)), t0), t1),
// (c0 + c2) * b0 - T0 + T1
c2: Fp2.add(Fp2.sub(Fp2.mul(Fp2.add(c0, c2), b0), t0), t1),
};
},
};
// Fp12
const FP12_FROBENIUS_COEFFICIENTS = calcFrobeniusCoefficients(Fp2, Fp2Nonresidue, Fp.ORDER, 12, 1, 6)[0];
const Fp12Add = ({ c0, c1 }, { c0: r0, c1: r1 }) => ({
c0: Fp6.add(c0, r0),
c1: Fp6.add(c1, r1),
});
const Fp12Subtract = ({ c0, c1 }, { c0: r0, c1: r1 }) => ({
c0: Fp6.sub(c0, r0),
c1: Fp6.sub(c1, r1),
});
const Fp12Multiply = ({ c0, c1 }, rhs) => {
if (typeof rhs === 'bigint')
return { c0: Fp6.mul(c0, rhs), c1: Fp6.mul(c1, rhs) };
let { c0: r0, c1: r1 } = rhs;
let t1 = Fp6.mul(c0, r0); // c0 * r0
let t2 = Fp6.mul(c1, r1); // c1 * r1
return {
c0: Fp6.add(t1, Fp6.mulByNonresidue(t2)), // T1 + T2 * v
// (c0 + c1) * (r0 + r1) - (T1 + T2)
c1: Fp6.sub(Fp6.mul(Fp6.add(c0, c1), Fp6.add(r0, r1)), Fp6.add(t1, t2)),
};
};
const Fp12Square = ({ c0, c1 }) => {
let ab = Fp6.mul(c0, c1); // c0 * c1
return {
// (c1 * v + c0) * (c0 + c1) - AB - AB * v
c0: Fp6.sub(Fp6.sub(Fp6.mul(Fp6.add(Fp6.mulByNonresidue(c1), c0), Fp6.add(c0, c1)), ab), Fp6.mulByNonresidue(ab)),
c1: Fp6.add(ab, ab),
}; // AB + AB
};
function Fp4Square(a, b) {
const a2 = Fp2.sqr(a);
const b2 = Fp2.sqr(b);
return {
first: Fp2.add(Fp2.mulByNonresidue(b2), a2), // b² * Nonresidue + a²
second: Fp2.sub(Fp2.sub(Fp2.sqr(Fp2.add(a, b)), a2), b2), // (a + b)² - a² - b²
};
}
const Fp12 = {
ORDER: Fp2.ORDER, // TODO: unused, but need to verify
isLE: Fp6.isLE,
BITS: 2 * Fp2.BITS,
BYTES: 2 * Fp2.BYTES,
MASK: (0, utils_js_1.bitMask)(2 * Fp2.BITS),
ZERO: { c0: Fp6.ZERO, c1: Fp6.ZERO },
ONE: { c0: Fp6.ONE, c1: Fp6.ZERO },
create: (num) => num,
isValid: ({ c0, c1 }) => Fp6.isValid(c0) && Fp6.isValid(c1),
is0: ({ c0, c1 }) => Fp6.is0(c0) && Fp6.is0(c1),
neg: ({ c0, c1 }) => ({ c0: Fp6.neg(c0), c1: Fp6.neg(c1) }),
eql: ({ c0, c1 }, { c0: r0, c1: r1 }) => Fp6.eql(c0, r0) && Fp6.eql(c1, r1),
sqrt: utils_js_1.notImplemented,
inv: ({ c0, c1 }) => {
let t = Fp6.inv(Fp6.sub(Fp6.sqr(c0), Fp6.mulByNonresidue(Fp6.sqr(c1)))); // 1 / (c0² - c1² * v)
return { c0: Fp6.mul(c0, t), c1: Fp6.neg(Fp6.mul(c1, t)) }; // ((C0 * T) * T) + (-C1 * T) * w
},
div: (lhs, rhs) => Fp12.mul(lhs, typeof rhs === 'bigint' ? Fp.inv(Fp.create(rhs)) : Fp12.inv(rhs)),
pow: (num, power) => mod.FpPow(Fp12, num, power),
invertBatch: (nums) => mod.FpInvertBatch(Fp12, nums),
// Normalized
add: Fp12Add,
sub: Fp12Subtract,
mul: Fp12Multiply,
sqr: Fp12Square,
// NonNormalized stuff
addN: Fp12Add,
subN: Fp12Subtract,
mulN: Fp12Multiply,
sqrN: Fp12Square,
// Bytes utils
fromBytes: (b) => {
if (b.length !== Fp12.BYTES)
throw new Error('fromBytes invalid length=' + b.length);
return {
c0: Fp6.fromBytes(b.subarray(0, Fp6.BYTES)),
c1: Fp6.fromBytes(b.subarray(Fp6.BYTES)),
};
},
toBytes: ({ c0, c1 }) => (0, utils_js_1.concatBytes)(Fp6.toBytes(c0), Fp6.toBytes(c1)),
cmov: ({ c0, c1 }, { c0: r0, c1: r1 }, c) => ({
c0: Fp6.cmov(c0, r0, c),
c1: Fp6.cmov(c1, r1, c),
}),
// Utils
// toString() {
// return '' + 'Fp12(' + this.c0 + this.c1 + '* w');
// },
// fromTuple(c: [Fp6, Fp6]) {
// return new Fp12(...c);
// }
fromBigTwelve: (t) => ({
c0: Fp6.fromBigSix(t.slice(0, 6)),
c1: Fp6.fromBigSix(t.slice(6, 12)),
}),
// Raises to q**i -th power
frobeniusMap(lhs, power) {
const { c0, c1, c2 } = Fp6.frobeniusMap(lhs.c1, power);
const coeff = FP12_FROBENIUS_COEFFICIENTS[power % 12];
return {
c0: Fp6.frobeniusMap(lhs.c0, power),
c1: Fp6.create({
c0: Fp2.mul(c0, coeff),
c1: Fp2.mul(c1, coeff),
c2: Fp2.mul(c2, coeff),
}),
};
},
mulByFp2: ({ c0, c1 }, rhs) => ({
c0: Fp6.mulByFp2(c0, rhs),
c1: Fp6.mulByFp2(c1, rhs),
}),
conjugate: ({ c0, c1 }) => ({ c0, c1: Fp6.neg(c1) }),
// Sparse multiplication
mul014: ({ c0, c1 }, o0, o1, o4) => {
let t0 = Fp6.mul01(c0, o0, o1);
let t1 = Fp6.mul1(c1, o4);
return {
c0: Fp6.add(Fp6.mulByNonresidue(t1), t0), // T1 * v + T0
// (c1 + c0) * [o0, o1+o4] - T0 - T1
c1: Fp6.sub(Fp6.sub(Fp6.mul01(Fp6.add(c1, c0), o0, Fp2.add(o1, o4)), t0), t1),
};
},
mul034: ({ c0, c1 }, o0, o3, o4) => {
const a = Fp6.create({
c0: Fp2.mul(c0.c0, o0),
c1: Fp2.mul(c0.c1, o0),
c2: Fp2.mul(c0.c2, o0),
});
const b = Fp6.mul01(c1, o3, o4);
const e = Fp6.mul01(Fp6.add(c0, c1), Fp2.add(o0, o3), o4);
return {
c0: Fp6.add(Fp6.mulByNonresidue(b), a),
c1: Fp6.sub(e, Fp6.add(a, b)),
};
},
// A cyclotomic group is a subgroup of Fp^n defined by
// GΦₙ(p) = {α ∈ Fpⁿ : α^Φₙ(p) = 1}
// The result of any pairing is in a cyclotomic subgroup
// https://eprint.iacr.org/2009/565.pdf
_cyclotomicSquare: opts.Fp12cyclotomicSquare,
_cyclotomicExp: opts.Fp12cyclotomicExp,
// https://eprint.iacr.org/2010/354.pdf
// https://eprint.iacr.org/2009/565.pdf
finalExponentiate: opts.Fp12finalExponentiate,
};
return { Fp, Fp2, Fp6, Fp4Square, Fp12 };
}
//# sourceMappingURL=tower.js.mapВыполнить команду
Для локальной разработки. Не используйте в интернете!