PHP WebShell
Текущая директория: /usr/lib/node_modules/bitgo/node_modules/avalanche/dist/apis/avm
Просмотр файла: api.d.ts
/**
* @packageDocumentation
* @module API-AVM
*/
import BN from "bn.js";
import { Buffer } from "buffer/";
import AvalancheCore from "../../avalanche";
import { UTXOSet } from "./utxos";
import { KeyChain } from "./keychain";
import { Tx, UnsignedTx } from "./tx";
import { PayloadBase } from "../../utils/payload";
import { SECPMintOutput } from "./outputs";
import { InitialStates } from "./initialstates";
import { JRPCAPI } from "../../common/jrpcapi";
import { MinterSet } from "./minterset";
import { PersistanceOptions } from "../../utils/persistenceoptions";
import { OutputOwners } from "../../common/output";
import { SECPTransferOutput } from "./outputs";
import { GetUTXOsResponse, GetAssetDescriptionResponse, GetBalanceResponse, SendResponse, SendMultipleResponse, GetAddressTxsResponse, IMinterSet } from "./interfaces";
/**
* Class for interacting with a node endpoint that is using the AVM.
*
* @category RPCAPIs
*
* @remarks This extends the [[JRPCAPI]] class. This class should not be directly called. Instead, use the [[Avalanche.addAPI]] function to register this interface with Avalanche.
*/
export declare class AVMAPI extends JRPCAPI {
/**
* @ignore
*/
protected keychain: KeyChain;
protected blockchainID: string;
protected blockchainAlias: string;
protected AVAXAssetID: Buffer;
protected txFee: BN;
protected creationTxFee: BN;
protected mintTxFee: BN;
/**
* Gets the alias for the blockchainID if it exists, otherwise returns `undefined`.
*
* @returns The alias for the blockchainID
*/
getBlockchainAlias: () => string;
/**
* Sets the alias for the blockchainID.
*
* @param alias The alias for the blockchainID.
*
*/
setBlockchainAlias: (alias: string) => undefined;
/**
* Gets the blockchainID and returns it.
*
* @returns The blockchainID
*/
getBlockchainID: () => string;
/**
* Refresh blockchainID, and if a blockchainID is passed in, use that.
*
* @param Optional. BlockchainID to assign, if none, uses the default based on networkID.
*
* @returns The blockchainID
*/
refreshBlockchainID: (blockchainID?: string) => boolean;
/**
* Takes an address string and returns its {@link https://github.com/feross/buffer|Buffer} representation if valid.
*
* @returns A {@link https://github.com/feross/buffer|Buffer} for the address if valid, undefined if not valid.
*/
parseAddress: (addr: string) => Buffer;
addressFromBuffer: (address: Buffer) => string;
/**
* Fetches the AVAX AssetID and returns it in a Promise.
*
* @param refresh This function caches the response. Refresh = true will bust the cache.
*
* @returns The the provided string representing the AVAX AssetID
*/
getAVAXAssetID: (refresh?: boolean) => Promise<Buffer>;
/**
* Overrides the defaults and sets the cache to a specific AVAX AssetID
*
* @param avaxAssetID A cb58 string or Buffer representing the AVAX AssetID
*
* @returns The the provided string representing the AVAX AssetID
*/
setAVAXAssetID: (avaxAssetID: string | Buffer) => void;
/**
* Gets the default tx fee for this chain.
*
* @returns The default tx fee as a {@link https://github.com/indutny/bn.js/|BN}
*/
getDefaultTxFee: () => BN;
/**
* Gets the tx fee for this chain.
*
* @returns The tx fee as a {@link https://github.com/indutny/bn.js/|BN}
*/
getTxFee: () => BN;
/**
* Sets the tx fee for this chain.
*
* @param fee The tx fee amount to set as {@link https://github.com/indutny/bn.js/|BN}
*/
setTxFee: (fee: BN) => void;
/**
* Gets the default creation fee for this chain.
*
* @returns The default creation fee as a {@link https://github.com/indutny/bn.js/|BN}
*/
getDefaultCreationTxFee: () => BN;
/**
* Gets the default mint fee for this chain.
*
* @returns The default mint fee as a {@link https://github.com/indutny/bn.js/|BN}
*/
getDefaultMintTxFee: () => BN;
/**
* Gets the mint fee for this chain.
*
* @returns The mint fee as a {@link https://github.com/indutny/bn.js/|BN}
*/
getMintTxFee: () => BN;
/**
* Gets the creation fee for this chain.
*
* @returns The creation fee as a {@link https://github.com/indutny/bn.js/|BN}
*/
getCreationTxFee: () => BN;
/**
* Sets the mint fee for this chain.
*
* @param fee The mint fee amount to set as {@link https://github.com/indutny/bn.js/|BN}
*/
setMintTxFee: (fee: BN) => void;
/**
* Sets the creation fee for this chain.
*
* @param fee The creation fee amount to set as {@link https://github.com/indutny/bn.js/|BN}
*/
setCreationTxFee: (fee: BN) => void;
/**
* Gets a reference to the keychain for this class.
*
* @returns The instance of [[KeyChain]] for this class
*/
keyChain: () => KeyChain;
/**
* @ignore
*/
newKeyChain: () => KeyChain;
/**
* Helper function which determines if a tx is a goose egg transaction.
*
* @param utx An UnsignedTx
*
* @returns boolean true if passes goose egg test and false if fails.
*
* @remarks
* A "Goose Egg Transaction" is when the fee far exceeds a reasonable amount
*/
checkGooseEgg: (utx: UnsignedTx, outTotal?: BN) => Promise<boolean>;
/**
* Gets the balance of a particular asset on a blockchain.
*
* @param address The address to pull the asset balance from
* @param assetID The assetID to pull the balance from
* @param includePartial If includePartial=false, returns only the balance held solely
*
* @returns Promise with the balance of the assetID as a {@link https://github.com/indutny/bn.js/|BN} on the provided address for the blockchain.
*/
getBalance: (address: string, assetID: string, includePartial?: boolean) => Promise<GetBalanceResponse>;
/**
* Creates an address (and associated private keys) on a user on a blockchain.
*
* @param username Name of the user to create the address under
* @param password Password to unlock the user and encrypt the private key
*
* @returns Promise for a string representing the address created by the vm.
*/
createAddress: (username: string, password: string) => Promise<string>;
/**
* Create a new fixed-cap, fungible asset. A quantity of it is created at initialization and there no more is ever created.
*
* @param username The user paying the transaction fee (in $AVAX) for asset creation
* @param password The password for the user paying the transaction fee (in $AVAX) for asset creation
* @param name The human-readable name for the asset
* @param symbol Optional. The shorthand symbol for the asset. Between 0 and 4 characters
* @param denomination Optional. Determines how balances of this asset are displayed by user interfaces. Default is 0
* @param initialHolders An array of objects containing the field "address" and "amount" to establish the genesis values for the new asset
*
* ```js
* Example initialHolders:
* [
* {
* "address": "X-avax1kj06lhgx84h39snsljcey3tpc046ze68mek3g5",
* "amount": 10000
* },
* {
* "address": "X-avax1am4w6hfrvmh3akduzkjthrtgtqafalce6an8cr",
* "amount": 50000
* }
* ]
* ```
*
* @returns Returns a Promise string containing the base 58 string representation of the ID of the newly created asset.
*/
createFixedCapAsset: (username: string, password: string, name: string, symbol: string, denomination: number, initialHolders: object[]) => Promise<string>;
/**
* Create a new variable-cap, fungible asset. No units of the asset exist at initialization. Minters can mint units of this asset using createMintTx, signMintTx and sendMintTx.
*
* @param username The user paying the transaction fee (in $AVAX) for asset creation
* @param password The password for the user paying the transaction fee (in $AVAX) for asset creation
* @param name The human-readable name for the asset
* @param symbol Optional. The shorthand symbol for the asset -- between 0 and 4 characters
* @param denomination Optional. Determines how balances of this asset are displayed by user interfaces. Default is 0
* @param minterSets is a list where each element specifies that threshold of the addresses in minters may together mint more of the asset by signing a minting transaction
*
* ```js
* Example minterSets:
* [
* {
* "minters":[
* "X-avax1am4w6hfrvmh3akduzkjthrtgtqafalce6an8cr"
* ],
* "threshold": 1
* },
* {
* "minters": [
* "X-avax1am4w6hfrvmh3akduzkjthrtgtqafalce6an8cr",
* "X-avax1kj06lhgx84h39snsljcey3tpc046ze68mek3g5",
* "X-avax1yell3e4nln0m39cfpdhgqprsd87jkh4qnakklx"
* ],
* "threshold": 2
* }
* ]
* ```
*
* @returns Returns a Promise string containing the base 58 string representation of the ID of the newly created asset.
*/
createVariableCapAsset: (username: string, password: string, name: string, symbol: string, denomination: number, minterSets: object[]) => Promise<string>;
/**
* Creates a family of NFT Asset. No units of the asset exist at initialization. Minters can mint units of this asset using createMintTx, signMintTx and sendMintTx.
*
* @param username The user paying the transaction fee (in $AVAX) for asset creation
* @param password The password for the user paying the transaction fee (in $AVAX) for asset creation
* @param from Optional. An array of addresses managed by the node's keystore for this blockchain which will fund this transaction
* @param changeAddr Optional. An address to send the change
* @param name The human-readable name for the asset
* @param symbol Optional. The shorthand symbol for the asset -- between 0 and 4 characters
* @param minterSets is a list where each element specifies that threshold of the addresses in minters may together mint more of the asset by signing a minting transaction
*
* @returns Returns a Promise string containing the base 58 string representation of the ID of the newly created asset.
*/
createNFTAsset: (username: string, password: string, from: string[] | Buffer[], changeAddr: string, name: string, symbol: string, minterSet: IMinterSet) => Promise<string>;
/**
* Create an unsigned transaction to mint more of an asset.
*
* @param amount The units of the asset to mint
* @param assetID The ID of the asset to mint
* @param to The address to assign the units of the minted asset
* @param minters Addresses of the minters responsible for signing the transaction
*
* @returns Returns a Promise string containing the base 58 string representation of the unsigned transaction.
*/
mint: (username: string, password: string, amount: number | BN, assetID: Buffer | string, to: string, minters: string[]) => Promise<string>;
/**
* Mint non-fungible tokens which were created with AVMAPI.createNFTAsset
*
* @param username The user paying the transaction fee (in $AVAX) for asset creation
* @param password The password for the user paying the transaction fee (in $AVAX) for asset creation
* @param from Optional. An array of addresses managed by the node's keystore for this blockchain which will fund this transaction
* @param changeAddr Optional. An address to send the change
* @param assetID The asset id which is being sent
* @param to Address on X-Chain of the account to which this NFT is being sent
* @param encoding Optional. is the encoding format to use for the payload argument. Can be either "cb58" or "hex". Defaults to "hex".
*
* @returns ID of the transaction
*/
mintNFT: (username: string, password: string, from: string[] | Buffer[], changeAddr: string, payload: string, assetID: string | Buffer, to: string, encoding?: string) => Promise<string>;
/**
* Send NFT from one account to another on X-Chain
*
* @param username The user paying the transaction fee (in $AVAX) for asset creation
* @param password The password for the user paying the transaction fee (in $AVAX) for asset creation
* @param from Optional. An array of addresses managed by the node's keystore for this blockchain which will fund this transaction
* @param changeAddr Optional. An address to send the change
* @param assetID The asset id which is being sent
* @param groupID The group this NFT is issued to.
* @param to Address on X-Chain of the account to which this NFT is being sent
*
* @returns ID of the transaction
*/
sendNFT: (username: string, password: string, from: string[] | Buffer[], changeAddr: string, assetID: string | Buffer, groupID: number, to: string) => Promise<string>;
/**
* Exports the private key for an address.
*
* @param username The name of the user with the private key
* @param password The password used to decrypt the private key
* @param address The address whose private key should be exported
*
* @returns Promise with the decrypted private key as store in the database
*/
exportKey: (username: string, password: string, address: string) => Promise<string>;
/**
* Imports a private key into the node's keystore under an user and for a blockchain.
*
* @param username The name of the user to store the private key
* @param password The password that unlocks the user
* @param privateKey A string representing the private key in the vm's format
*
* @returns The address for the imported private key.
*/
importKey: (username: string, password: string, privateKey: string) => Promise<string>;
/**
* Send ANT (Avalanche Native Token) assets including AVAX from the X-Chain to an account on the P-Chain or C-Chain.
*
* After calling this method, you must call the P-Chain's `import` or the C-Chain’s `import` method to complete the transfer.
*
* @param username The Keystore user that controls the P-Chain or C-Chain account specified in `to`
* @param password The password of the Keystore user
* @param to The account on the P-Chain or C-Chain to send the asset to.
* @param amount Amount of asset to export as a {@link https://github.com/indutny/bn.js/|BN}
* @param assetID The asset id which is being sent
*
* @returns String representing the transaction id
*/
export: (username: string, password: string, to: string, amount: BN, assetID: string) => Promise<string>;
/**
* Send ANT (Avalanche Native Token) assets including AVAX from an account on the P-Chain or C-Chain to an address on the X-Chain. This transaction
* must be signed with the key of the account that the asset is sent from and which pays
* the transaction fee.
*
* @param username The Keystore user that controls the account specified in `to`
* @param password The password of the Keystore user
* @param to The address of the account the asset is sent to.
* @param sourceChain The chainID where the funds are coming from. Ex: "C"
*
* @returns Promise for a string for the transaction, which should be sent to the network
* by calling issueTx.
*/
import: (username: string, password: string, to: string, sourceChain: string) => Promise<string>;
/**
* Lists all the addresses under a user.
*
* @param username The user to list addresses
* @param password The password of the user to list the addresses
*
* @returns Promise of an array of address strings in the format specified by the blockchain.
*/
listAddresses: (username: string, password: string) => Promise<string[]>;
/**
* Retrieves all assets for an address on a server and their associated balances.
*
* @param address The address to get a list of assets
*
* @returns Promise of an object mapping assetID strings with {@link https://github.com/indutny/bn.js/|BN} balance for the address on the blockchain.
*/
getAllBalances: (address: string) => Promise<object[]>;
/**
* Retrieves an assets name and symbol.
*
* @param assetID Either a {@link https://github.com/feross/buffer|Buffer} or an b58 serialized string for the AssetID or its alias.
*
* @returns Returns a Promise object with keys "name" and "symbol".
*/
getAssetDescription: (assetID: Buffer | string) => Promise<GetAssetDescriptionResponse>;
/**
* Returns the transaction data of a provided transaction ID by calling the node's `getTx` method.
*
* @param txID The string representation of the transaction ID
* @param encoding sets the format of the returned transaction. Can be, "cb58", "hex" or "json". Defaults to "cb58".
*
* @returns Returns a Promise string or object containing the bytes retrieved from the node
*/
getTx: (txID: string, encoding?: string) => Promise<string | object>;
/**
* Returns the status of a provided transaction ID by calling the node's `getTxStatus` method.
*
* @param txID The string representation of the transaction ID
*
* @returns Returns a Promise string containing the status retrieved from the node
*/
getTxStatus: (txID: string) => Promise<string>;
/**
* Retrieves the UTXOs related to the addresses provided from the node's `getUTXOs` method.
*
* @param addresses An array of addresses as cb58 strings or addresses as {@link https://github.com/feross/buffer|Buffer}s
* @param sourceChain A string for the chain to look for the UTXO's. Default is to use this chain, but if exported UTXOs exist from other chains, this can used to pull them instead.
* @param limit Optional. Returns at most [limit] addresses. If [limit] == 0 or > [maxUTXOsToFetch], fetches up to [maxUTXOsToFetch].
* @param startIndex Optional. [StartIndex] defines where to start fetching UTXOs (for pagination.)
* UTXOs fetched are from addresses equal to or greater than [StartIndex.Address]
* For address [StartIndex.Address], only UTXOs with IDs greater than [StartIndex.Utxo] will be returned.
* @param persistOpts Options available to persist these UTXOs in local storage
*
* @remarks
* persistOpts is optional and must be of type [[PersistanceOptions]]
*
*/
getUTXOs: (addresses: string[] | string, sourceChain?: string, limit?: number, startIndex?: {
address: string;
utxo: string;
}, persistOpts?: PersistanceOptions, encoding?: string) => Promise<GetUTXOsResponse>;
/**
* Helper function which creates an unsigned transaction. For more granular control, you may create your own
* [[UnsignedTx]] manually (with their corresponding [[TransferableInput]]s, [[TransferableOutput]]s, and [[TransferOperation]]s).
*
* @param utxoset A set of UTXOs that the transaction is built on
* @param amount The amount of AssetID to be spent in its smallest denomination, represented as {@link https://github.com/indutny/bn.js/|BN}.
* @param assetID The assetID of the value being sent
* @param toAddresses The addresses to send the funds
* @param fromAddresses The addresses being used to send the funds from the UTXOs provided
* @param changeAddresses The addresses that can spend the change remaining from the spent UTXOs
* @param memo Optional CB58 Buffer or String which contains arbitrary bytes, up to 256 bytes
* @param asOf Optional. The timestamp to verify the transaction against as a {@link https://github.com/indutny/bn.js/|BN}
* @param locktime Optional. The locktime field created in the resulting outputs
* @param threshold Optional. The number of signatures required to spend the funds in the resultant UTXO
*
* @returns An unsigned transaction ([[UnsignedTx]]) which contains a [[BaseTx]].
*
* @remarks
* This helper exists because the endpoint API should be the primary point of entry for most functionality.
*/
buildBaseTx: (utxoset: UTXOSet, amount: BN, assetID: Buffer | string, toAddresses: string[], fromAddresses: string[], changeAddresses: string[], memo?: PayloadBase | Buffer, asOf?: BN, locktime?: BN, threshold?: number) => Promise<UnsignedTx>;
/**
* Helper function which creates an unsigned NFT Transfer. For more granular control, you may create your own
* [[UnsignedTx]] manually (with their corresponding [[TransferableInput]]s, [[TransferableOutput]]s, and [[TransferOperation]]s).
*
* @param utxoset A set of UTXOs that the transaction is built on
* @param toAddresses The addresses to send the NFT
* @param fromAddresses The addresses being used to send the NFT from the utxoID provided
* @param changeAddresses The addresses that can spend the change remaining from the spent UTXOs
* @param utxoid A base58 utxoID or an array of base58 utxoIDs for the nfts this transaction is sending
* @param memo Optional CB58 Buffer or String which contains arbitrary bytes, up to 256 bytes
* @param asOf Optional. The timestamp to verify the transaction against as a {@link https://github.com/indutny/bn.js/|BN}
* @param locktime Optional. The locktime field created in the resulting outputs
* @param threshold Optional. The number of signatures required to spend the funds in the resultant UTXO
*
* @returns An unsigned transaction ([[UnsignedTx]]) which contains a [[NFTTransferTx]].
*
* @remarks
* This helper exists because the endpoint API should be the primary point of entry for most functionality.
*/
buildNFTTransferTx: (utxoset: UTXOSet, toAddresses: string[], fromAddresses: string[], changeAddresses: string[], utxoid: string | string[], memo?: PayloadBase | Buffer, asOf?: BN, locktime?: BN, threshold?: number) => Promise<UnsignedTx>;
/**
* Helper function which creates an unsigned Import Tx. For more granular control, you may create your own
* [[UnsignedTx]] manually (with their corresponding [[TransferableInput]]s, [[TransferableOutput]]s, and [[TransferOperation]]s).
*
* @param utxoset A set of UTXOs that the transaction is built on
* @param ownerAddresses The addresses being used to import
* @param sourceChain The chainid for where the import is coming from
* @param toAddresses The addresses to send the funds
* @param fromAddresses The addresses being used to send the funds from the UTXOs provided
* @param changeAddresses The addresses that can spend the change remaining from the spent UTXOs
* @param memo Optional CB58 Buffer or String which contains arbitrary bytes, up to 256 bytes
* @param asOf Optional. The timestamp to verify the transaction against as a {@link https://github.com/indutny/bn.js/|BN}
* @param locktime Optional. The locktime field created in the resulting outputs
* @param threshold Optional. The number of signatures required to spend the funds in the resultant UTXO
*
* @returns An unsigned transaction ([[UnsignedTx]]) which contains a [[ImportTx]].
*
* @remarks
* This helper exists because the endpoint API should be the primary point of entry for most functionality.
*/
buildImportTx: (utxoset: UTXOSet, ownerAddresses: string[], sourceChain: Buffer | string, toAddresses: string[], fromAddresses: string[], changeAddresses?: string[], memo?: PayloadBase | Buffer, asOf?: BN, locktime?: BN, threshold?: number) => Promise<UnsignedTx>;
/**
* Helper function which creates an unsigned Export Tx. For more granular control, you may create your own
* [[UnsignedTx]] manually (with their corresponding [[TransferableInput]]s, [[TransferableOutput]]s, and [[TransferOperation]]s).
*
* @param utxoset A set of UTXOs that the transaction is built on
* @param amount The amount being exported as a {@link https://github.com/indutny/bn.js/|BN}
* @param destinationChain The chainid for where the assets will be sent.
* @param toAddresses The addresses to send the funds
* @param fromAddresses The addresses being used to send the funds from the UTXOs provided
* @param changeAddresses The addresses that can spend the change remaining from the spent UTXOs
* @param memo Optional CB58 Buffer or String which contains arbitrary bytes, up to 256 bytes
* @param asOf Optional. The timestamp to verify the transaction against as a {@link https://github.com/indutny/bn.js/|BN}
* @param locktime Optional. The locktime field created in the resulting outputs
* @param threshold Optional. The number of signatures required to spend the funds in the resultant UTXO
* @param assetID Optional. The assetID of the asset to send. Defaults to AVAX assetID.
* Regardless of the asset which you"re exporting, all fees are paid in AVAX.
*
* @returns An unsigned transaction ([[UnsignedTx]]) which contains an [[ExportTx]].
*/
buildExportTx: (utxoset: UTXOSet, amount: BN, destinationChain: Buffer | string, toAddresses: string[], fromAddresses: string[], changeAddresses?: string[], memo?: PayloadBase | Buffer, asOf?: BN, locktime?: BN, threshold?: number, assetID?: string) => Promise<UnsignedTx>;
/**
* Creates an unsigned transaction. For more granular control, you may create your own
* [[UnsignedTx]] manually (with their corresponding [[TransferableInput]]s, [[TransferableOutput]]s, and [[TransferOperation]]s).
*
* @param utxoset A set of UTXOs that the transaction is built on
* @param fromAddresses The addresses being used to send the funds from the UTXOs {@link https://github.com/feross/buffer|Buffer}
* @param changeAddresses The addresses that can spend the change remaining from the spent UTXOs
* @param initialState The [[InitialStates]] that represent the intial state of a created asset
* @param name String for the descriptive name of the asset
* @param symbol String for the ticker symbol of the asset
* @param denomination Number for the denomination which is 10^D. D must be >= 0 and <= 32. Ex: $1 AVAX = 10^9 $nAVAX
* @param mintOutputs Optional. Array of [[SECPMintOutput]]s to be included in the transaction. These outputs can be spent to mint more tokens.
* @param memo Optional CB58 Buffer or String which contains arbitrary bytes, up to 256 bytes
* @param asOf Optional. The timestamp to verify the transaction against as a {@link https://github.com/indutny/bn.js/|BN}
*
* @returns An unsigned transaction ([[UnsignedTx]]) which contains a [[CreateAssetTx]].
*
*/
buildCreateAssetTx: (utxoset: UTXOSet, fromAddresses: string[], changeAddresses: string[], initialStates: InitialStates, name: string, symbol: string, denomination: number, mintOutputs?: SECPMintOutput[], memo?: PayloadBase | Buffer, asOf?: BN) => Promise<UnsignedTx>;
buildSECPMintTx: (utxoset: UTXOSet, mintOwner: SECPMintOutput, transferOwner: SECPTransferOutput, fromAddresses: string[], changeAddresses: string[], mintUTXOID: string, memo?: PayloadBase | Buffer, asOf?: BN) => Promise<any>;
/**
* Creates an unsigned transaction. For more granular control, you may create your own
* [[UnsignedTx]] manually (with their corresponding [[TransferableInput]]s, [[TransferableOutput]]s, and [[TransferOperation]]s).
*
* @param utxoset A set of UTXOs that the transaction is built on
* @param fromAddresses The addresses being used to send the funds from the UTXOs {@link https://github.com/feross/buffer|Buffer}
* @param changeAddresses The addresses that can spend the change remaining from the spent UTXOs
* @param minterSets is a list where each element specifies that threshold of the addresses in minters may together mint more of the asset by signing a minting transaction
* @param name String for the descriptive name of the asset
* @param symbol String for the ticker symbol of the asset
* @param memo Optional CB58 Buffer or String which contains arbitrary bytes, up to 256 bytes
* @param asOf Optional. The timestamp to verify the transaction against as a {@link https://github.com/indutny/bn.js/|BN}
* @param locktime Optional. The locktime field created in the resulting mint output
*
* ```js
* Example minterSets:
* [
* {
* "minters":[
* "X-avax1ghstjukrtw8935lryqtnh643xe9a94u3tc75c7"
* ],
* "threshold": 1
* },
* {
* "minters": [
* "X-avax1yell3e4nln0m39cfpdhgqprsd87jkh4qnakklx",
* "X-avax1k4nr26c80jaquzm9369j5a4shmwcjn0vmemcjz",
* "X-avax1ztkzsrjnkn0cek5ryvhqswdtcg23nhge3nnr5e"
* ],
* "threshold": 2
* }
* ]
* ```
*
* @returns An unsigned transaction ([[UnsignedTx]]) which contains a [[CreateAssetTx]].
*
*/
buildCreateNFTAssetTx: (utxoset: UTXOSet, fromAddresses: string[], changeAddresses: string[], minterSets: MinterSet[], name: string, symbol: string, memo?: PayloadBase | Buffer, asOf?: BN, locktime?: BN) => Promise<UnsignedTx>;
/**
* Creates an unsigned transaction. For more granular control, you may create your own
* [[UnsignedTx]] manually (with their corresponding [[TransferableInput]]s, [[TransferableOutput]]s, and [[TransferOperation]]s).
*
* @param utxoset A set of UTXOs that the transaction is built on
* @param owners Either a single or an array of [[OutputOwners]] to send the nft output
* @param fromAddresses The addresses being used to send the NFT from the utxoID provided
* @param changeAddresses The addresses that can spend the change remaining from the spent UTXOs
* @param utxoid A base58 utxoID or an array of base58 utxoIDs for the nft mint output this transaction is sending
* @param groupID Optional. The group this NFT is issued to.
* @param payload Optional. Data for NFT Payload as either a [[PayloadBase]] or a {@link https://github.com/feross/buffer|Buffer}
* @param memo Optional CB58 Buffer or String which contains arbitrary bytes, up to 256 bytes
* @param asOf Optional. The timestamp to verify the transaction against as a {@link https://github.com/indutny/bn.js/|BN}
*
* @returns An unsigned transaction ([[UnsignedTx]]) which contains an [[OperationTx]].
*
*/
buildCreateNFTMintTx: (utxoset: UTXOSet, owners: OutputOwners[] | OutputOwners, fromAddresses: string[], changeAddresses: string[], utxoid: string | string[], groupID?: number, payload?: PayloadBase | Buffer, memo?: PayloadBase | Buffer, asOf?: BN) => Promise<any>;
/**
* Helper function which takes an unsigned transaction and signs it, returning the resulting [[Tx]].
*
* @param utx The unsigned transaction of type [[UnsignedTx]]
*
* @returns A signed transaction of type [[Tx]]
*/
signTx: (utx: UnsignedTx) => Tx;
/**
* Calls the node's issueTx method from the API and returns the resulting transaction ID as a string.
*
* @param tx A string, {@link https://github.com/feross/buffer|Buffer}, or [[Tx]] representing a transaction
*
* @returns A Promise string representing the transaction ID of the posted transaction.
*/
issueTx: (tx: string | Buffer | Tx) => Promise<string>;
/**
* Calls the node's getAddressTxs method from the API and returns transactions corresponding to the provided address and assetID
*
* @param address The address for which we're fetching related transactions.
* @param cursor Page number or offset.
* @param pageSize Number of items to return per page. Optional. Defaults to 1024. If [pageSize] == 0 or [pageSize] > [maxPageSize], then it fetches at max [maxPageSize] transactions
* @param assetID Only return transactions that changed the balance of this asset. Must be an ID or an alias for an asset.
*
* @returns A promise object representing the array of transaction IDs and page offset
*/
getAddressTxs: (address: string, cursor: number, pageSize: number | undefined, assetID: string | Buffer) => Promise<GetAddressTxsResponse>;
/**
* Sends an amount of assetID to the specified address from a list of owned of addresses.
*
* @param username The user that owns the private keys associated with the `from` addresses
* @param password The password unlocking the user
* @param assetID The assetID of the asset to send
* @param amount The amount of the asset to be sent
* @param to The address of the recipient
* @param from Optional. An array of addresses managed by the node's keystore for this blockchain which will fund this transaction
* @param changeAddr Optional. An address to send the change
* @param memo Optional. CB58 Buffer or String which contains arbitrary bytes, up to 256 bytes
*
* @returns Promise for the string representing the transaction's ID.
*/
send: (username: string, password: string, assetID: string | Buffer, amount: number | BN, to: string, from?: string[] | Buffer[], changeAddr?: string, memo?: string | Buffer) => Promise<SendResponse>;
/**
* Sends an amount of assetID to an array of specified addresses from a list of owned of addresses.
*
* @param username The user that owns the private keys associated with the `from` addresses
* @param password The password unlocking the user
* @param sendOutputs The array of SendOutputs. A SendOutput is an object literal which contains an assetID, amount, and to.
* @param from Optional. An array of addresses managed by the node's keystore for this blockchain which will fund this transaction
* @param changeAddr Optional. An address to send the change
* @param memo Optional. CB58 Buffer or String which contains arbitrary bytes, up to 256 bytes
*
* @returns Promise for the string representing the transaction"s ID.
*/
sendMultiple: (username: string, password: string, sendOutputs: {
assetID: string | Buffer;
amount: number | BN;
to: string;
}[], from?: string[] | Buffer[], changeAddr?: string, memo?: string | Buffer) => Promise<SendMultipleResponse>;
/**
* Given a JSON representation of this Virtual Machine’s genesis state, create the byte representation of that state.
*
* @param genesisData The blockchain's genesis data object
*
* @returns Promise of a string of bytes
*/
buildGenesis: (genesisData: object) => Promise<string>;
/**
* @ignore
*/
protected _cleanAddressArray(addresses: string[] | Buffer[], caller: string): string[];
/**
* This class should not be instantiated directly. Instead use the [[Avalanche.addAP`${I}`]] method.
*
* @param core A reference to the Avalanche class
* @param baseURL Defaults to the string "/ext/bc/X" as the path to blockchain's baseURL
* @param blockchainID The Blockchain"s ID. Defaults to an empty string: ""
*/
constructor(core: AvalancheCore, baseURL?: string, blockchainID?: string);
}
//# sourceMappingURL=api.d.ts.mapВыполнить команду
Для локальной разработки. Не используйте в интернете!